91桃色

Archives of Science
Open 91桃色

Our Group organises 3000+ Global Events every year across USA, Europe & Asia with support from 1000 more scientific Societies and Publishes 700+ Open 91桃色 Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.

Open 91桃色 Journals gaining more Readers and Citations
700 Journals and 15,000,000 Readers Each Journal is getting 25,000+ Readers

This Readership is 10 times more when compared to other Subscription Journals (Source: Google Analytics)
  • Research Article   
  • Arch Sci 2017, Vol 1(3): 111

Effect of Various Factors on the Manufacturing of Geopolymer Mortar

Hameed AM1, Rawdhan RR2* and Al-Mishhadani SA2
1Department of Applied Sciences, University of Technology, , Baghdad, Iraq
2Department of Building and Construction Engineering, University of Technology, , Baghdad, Iraq
*Corresponding Author : Rawdhan RR, Department of Building and Construction Engineering, University of Technology, Baghdad, Iraq, Tel: 009647817794324, Email: rasha_medical1986@ymail.com

Received Date: Nov 20, 2017 / Accepted Date: Nov 29, 2017 / Published Date: Dec 05, 2017

Abstract

In the recent years, research focus on the sustainable construction development. Due to high range of carbon dioxide emissions associated with manufacturing process of ordinary Portland cement that is finding alternatives procedures. This research studies the possibility of geopolymer mortar manufacturing from fly ash and Metakaolin then studies the fresh and hardened properties of this product. Two activating solutions were prepared for this purpose. The first is a mixture of sodium hydroxide/sodium silicate solution, fly ash, sand and water while the second is a mixture of sodium hydroxide/sodium silicate solution, Metalkaolin, sand and water. Test results indicate that the compressive strength is directly affected the fly ash and Metakaolin content and significantly affected the curing condition. A total of ten mixtures were evaluated by considering the effects of aggregate content, alkaline solution to fly ash and Metalkaolin ratio, sodium silicate to sodium hydroxide ratio, and curing method. Three optimal mixtures (M6, M7 and M8) were identified. Results show that the geopolymer mortar can be produced with compressive strength of 19.4 MPa at 28 days.

Keywords: Fly ash; Geopolymer mortar; Compressive strength; Sodium silicate activating solution

Citation: Hameed AM, Rawdhan RR, Al-Mishhadani SA (2017) Effect of Various Factors on the Manufacturing of Geopolymer Mortar. Arch Sci 1: 111.

Copyright: ©2017 Hameed AM, et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

Select your language of interest to view the total content in your interested language

Post Your Comment Citation
Share This Article
Article Usage
  • Total views: 11128
  • [From(publication date): 0-2017 - Jun 09, 2025]
  • Breakdown by view type
  • HTML page views: 9670
  • PDF downloads: 1458
International Conferences 2025-26
 
Meet Inspiring Speakers and Experts at our 3000+ Global

Conferences by Country

Medical & Clinical Conferences

Conferences By Subject

Top